Top Wheel Bearing Removal Tool Recommendations

Wheel bearing removal tools are among some of the most valuable tools that you can have for doing work on any vehicle. They make removing bearings a breeze, and there are lots of great kits available, so read on to find out the top 5 choices you should be considering.

Why Do You Need a Wheel Bearing Removal Tool?

As the name implies, a bearing removal tool removes bearings from the wheel of a vehicle. Of course, other pieces of equipment are involved in the overall process, but the wheel bearing removal tool is the primary one that does the bulk of the work.

Removing wheel bearings becomes far more time-consuming and tedious work without a wheel bearing tool. You can find other ways to remove bearings without a wheel bearing remover tool, but doing that is like trying to undo a screw without a screwdriver. Even though you can still have success, why make your life more painful than it needs to be?

How Does It Work?

There are a couple of different ways to use wheel/hub bearing removal tools because many work a little differently. That said, you generally assemble the necessary parts of the bearing removal tool and apply the tool to whatever bearing you want to remove. Once the tool is in place, you can then turn it until the bearing comes right off.

There are also a few general rules that you will want to follow at all times to avoid damaging your vehicle. The most important of these rules is that once you attach your removal tool to the bearing you want to take off, never apply too much force to remove the bearing.

Generally, when attaching or detaching car parts, you should rarely ever find yourself having to apply excessive amounts of force, be it in turning, pressing, or pulling. This especially applies to wheel bearings because it does not take much to damage them.

The only instance in which you should not worry about destroying a wheel bearing during removal is if you already plan to replace it with a new bearing.

And of course, it should go without saying that following the instruction manual is always best since not all-wheel bearing removal tools work precisely the same.

What Are the 5 Best Wheel Bearing Removal Tools?

Brand (Insert brand name and photo)FeaturesAdvantagesDisadvantagesPrice
Orion Motor Tech 23-Piece FWD23 Different Pieces. Covers multiple sleeve sizes, plate sizes, and bushing ranges.Wide range of compatibility and no need for front end alignment.Heavier weight. Weighs 24 pounds. $72.99
Wheel Bearing Puller Tool KitCompatible with Harley Davidson motorcycles. Comes with bolts, plates, pullers, and dowels.Extremely compact and lightweight.Can perform wheel bearing removals well, but lacks lots of variety like some of its competitors provide. $49.99
WEST ORGIN 27213Heavy-duty. Comes with hub removal tool, push washer, nut bolt and heavy bearing, front wheel bearing adapter, and receiver sleeve.Compatible with rear wheel and all-wheel drive vehicles Can withstand a large amount of use and does not require a hammer or workshop press for installing parts..Does not work with all vehicles. $239.99
Pit Posse VT102 Compatible with motorcycles from 2000 on. Designed to remove or install 1 inch, ¾ inch, or 25mm sealed type bearings. Comes with an expander dowel, installation bolt, main body puller, three removers and installers, installer backing plate, and copper washer, Hybrid of lighter weight and tool variety, but does not excel at either to the same degree as more specialized tool kits. $89.95
ATPEAM Universal Front Wheel Drive Bearing Puller All in one tool kit with 19pcs. Does not require disassembling of steering knuckle and strut to remove bearings. Comes with a steel drift, receiver sleeve, hub screws, drifts, and adapter drifts for high amounts of versatility. Heavier weight. Weighs 18.5 pounds. $59.95

Complete Bearing Removal Tool Brand Reviews

Here are reviews of the five best brands for wheel bearing removal tools.

1) Orion Motor Tech 23-Piece FWD

 

Features

The Orion Motor comes with 23 different pieces in the set. These pieces include 1 wheel hub installer, 1 sliding screw, 1 sliding nut, 4 sleeves, 12 bushings, 2 sleeve plates, and 2 washers. Such variety allows this set to cover several sleeve sizes, plate sizes, and bushing ranges.

Pros

If you are looking for a wheel bearing removal toolset that offers wide compatibility with front-wheel-drive vehicles, The Orion Motor Tech is one of the best you can find currently. The all-in-one toolkit is also usable even if a vehicle still has its steering knuckle and strut assembly on, so there is no need for front-end alignment post maintenance.

Cons

One downside to this tool kit is that it weighs 24 pounds, which is a bit on the heavier side of things, but certainly not unmanageable. Just make sure you will be okay with the weight in case you ever have to carry it around for whatever reason.

Price

The Orion Motor Tech 23-piece FWD costs $72.99. There are cheaper and more expensive options, making this kit a good one if you are on a budget but still want something that you can rely on.

Verdict

Overall, the Orion Motor Tech 23-piece FWD kit is a highly recommendable piece of equipment that checks all the boxes when it comes to quality wheel bearing removal tool kits. And in addition to the features it brings to the table, it also looks clean and colorful in red, so you will be even happier if you care about aesthetics with your tools.

2) Wheel Bearing Puller Tool Kit

Features

Next, we have the Wheel bearing Puller Tool Kit. The standout feature of this tool kit is its compatibility with the majority of the Harley-Davidson motorcycles from 2000 to 2020. That alone makes the tool kit very attractive if you own a Harley-Davidson bike, but you will undoubtedly enjoy the flexibility that this kit also brings with its bolts, plates, pullers, and dowels.

Pros

Unlike some other wheel bearing removal tool kits, the Wheel bearing Puller Tool Kit is compact, lightweight, and built for long-term convenience. You’ll still need a wrench to get your wheel bearings off, but aside from that, this tool kit will supply you with everything that you need to get the job done right and easily.

Cons

The only real con to this tool kit is its variety. Being smaller and lighter in weight, it naturally carries fewer tools and equipment than the Orion Motor Tech 23-piece FWD. However, this is not to say that the Wheel Bearing Puller tool kit does not have all the necessary parts for the job because it certainly does. It just does not have quite the same great level of flexibility.

Price

The Wheel Bearing Puller Tool Kit costs a very reasonable $49.99, which is a bit lower because of the lesser number of pieces that it comes with.

Verdict

You could make a case that the Wheel Bearing Puller Tool Kit is not as good as some other kits due to it not having as much variety as others. However, that lack of variety is not detrimental to the point where you should not consider this particular tool kit.

3) WEST ORIGIN 27213 Master Wheel Hub and Bearing Remover and Installer Kit

Features

The WEST ORIGIN kit is the true heavy-duty option for wheel bearing removal. In this kit you’ll find a hub removal tool, push washer, nut bolt and heavy bearing, front-wheel bearing adapter, and receiver sleeve. It’s also perfectly suitable for rear-wheel and all-wheel drive vehicles.

Pros

This tool kit is the best if you do a lot of or plan to do a lot of work involving wheel bearing removals. It will last a long time and handle any job well, so you will never have to worry about any individual parts breaking on you if you use them correctly. Installing the parts in this kit also does not require a hammer or workshop press.

Cons

The WEST ORIGIN kit works with many European and Asian vehicles, but it does not work with all cars. Because of this, make sure whatever vehicle you’re going to work on is compatible before you buy the kit.

Price

The WEST ORIGIN kit is the most expensive kit, costing $239.99. You’re most definitely paying a premium for this kit, but if you are doing a lot of work that involves removing wheel bearings, this kit is worth every penny.

Verdict

Few other tool kits can match the heavy-duty capabilities of the WEST ORIGIN tool kit, and because of that fact, it fills a niche that might perfectly suit your needs. If that’s the case, you should seriously consider investing in this tool kit over other options.

4) Pit Posse VT102 Harley Davidson Wheel Bearing Puller/Remover and Installer

Features

The Pit Posse VT102 Harley Davidson is another tool kit specializing in wheel bearing removals from motorcycles made from 2000 and up. It is made to both remove and install 1 inch, ¾ inch, and 25mm sealed type bearings, and it comes with a wide variety of tools for the job.

Pros

The Pit Posse has an expander dowel, an installation bolt, main body puller, three removers and installers, an installer backing plate, copper washer, and all the nuts and bolts for each piece. It is also a lighter tool kit as it only weighs 5.2 pounds.

Cons

The most significant con with this tool kit is that you might find it to do nothing substantially better than the WEST ORIGIN kit and the Wheel Bearing Puller kit. It sits between those two in that it’s lightweight while still offering a good variety of tools for you to work with, so think of it as a hybrid kit. Though being a hybrid might be a con if you want a specialized kit.

Price

The Pit Posse is also in the middle of the price range, as it costs $89.95.

Verdict

You will definitely get your money’s worth out of this kit. It is excellent both for people who do a lot of work with wheel bearings and people who just want to have a tool kit on hand if a situation where it’s needed ever arises.

5) ATPEAM 19pcs Universal Front Wheel Drive Bearing Puller

Features

The ATPEAM Universal Front Wheel Driver Bearing Puller is a fully complete tool kit that will allow you to remove and install bearings without disassembling the steering knuckle or strut. It works on most front-wheel drive vehicles, and it comes in a blow mold case for easy and secure transportation that will give the tools a long-lasting lifespan.

Pros

If you are looking for an all-in-one toolset, this kit is an excellent choice because it comes with a steel drift, receiver sleeve, 3 M12 x 1.5mm hub screws, 3 M14 x 1.5mm hub screws, two drifts, and nine adapter drifts. When you combine all these parts, you have yourself a tool kit that can tackle any wheel bearing removal task you put it to.

Cons

The only real con to this tool kit is its weight, as it weighs 18.5 pounds. However, this amount of weight is understandable when considering how much there is inside the kit.

Price

The ATPEAM Universal Front Wheel Driver Bearing Puller costs $59.95.

Verdict

Like the rest of the wheel bearing removal kits on this list, you will find that this kit gets the job done exceptionally well. And if flexibility is a strong selling point for you, then this kit should stand out a bit more from the rest.

Where to Buy Bearing Removal Tool

You can buy bearing removal tools at your local auto parts store, but all the tool kits on this list are purchasable on Amazon.

Pro Tip For Buying Bearing Removal Tool

Regardless of what bearing removal tool kit you purchase, when you’re looking for the right tool kit, the most helpful tip to keep in mind is what you specifically need.

All bearing removal tool kits can remove bearings just fine, but the specialization is what differentiates them from each other. Flexibility, heavy-duty, compatibility, ease of use, etc., be sure to remember these when looking at different tool kits. That way, you will be able to pick out the perfect wheel bearing removal tool kit for your needs.

Avatar photo

Author: DJ

Dave Junior is a hands-on automotive technician with experience in performing service, diagnostics, and repairs on domestic and imported vehicles. He enjoys writing and sharing his knowledge far and wide.

Leave a Reply

Your email address will not be published.