Changing your car’s oil is a routine maintenance task that can help keep your vehicle running smoothly. However, even experienced drivers can make mistakes that lead to bigger problems down the road. In this article, we’ll highlight 15 common oil change mistakes every driver should avoid to ensure your car stays in top condition and avoid costly repairs.
Contents
Using the Wrong Oil Type
Using the wrong oil type can severely damage your engine. Each engine requires a specific oil viscosity and formulation to operate efficiently. Using the incorrect type can lead to improper lubrication, increased friction, and even engine failure. Always consult your vehicle’s manual to ensure you use the recommended oil type.
Not Changing the Oil Filter
An oil filter traps contaminants and prevents them from circulating through the engine. Failing to change the oil filter can lead to clogged filters, reduced oil flow, and increased engine wear. Always replace the oil filter with each oil change to maintain engine health and performance.
Overfilling the Oil
Overfilling the oil can cause increased pressure inside the engine, leading to oil leaks, blown seals, and damage to engine components. Always check the oil level with the dipstick after adding oil to ensure you have filled it to the correct level.
Underfilling the Oil
Underfilling the oil can result in insufficient lubrication, causing increased friction, overheating, and potential engine damage. Make sure to fill the oil to the recommended level to avoid these issues and ensure optimal engine performance.
Using Low-Quality Oil
Low-quality oil lacks the necessary additives and protection for your engine, leading to quicker degradation and increased wear. Always use high-quality, reputable oil brands to ensure your engine receives the best protection and longevity.
Not Tightening the Oil Drain Plug Properly
An improperly tightened oil drain plug can lead to oil leaks and potential engine damage. Ensure the drain plug is tightened to the manufacturer’s specifications to prevent leaks and maintain proper oil pressure.
Ignoring the Manufacturer’s Recommendations
Vehicle manufacturers provide specific recommendations for oil type, change intervals, and procedures. Ignoring these recommendations can lead to reduced engine performance and potential damage. Always follow the manufacturer’s guidelines for optimal engine health.
Not Warming Up the Engine Before Draining Oil
Warming up the engine helps to thin the oil, allowing it to drain more completely and removing more contaminants. Draining cold oil can leave behind more sludge and deposits. Run the engine for a few minutes before changing the oil for a more effective oil change.
Changing Oil on an Uneven Surface
Changing oil on an uneven surface can lead to inaccurate oil level readings and improper drainage. Always perform oil changes on a flat, level surface to ensure accurate measurements and complete drainage.
Not Checking for Leaks After Changing Oil
Failing to check for leaks after an oil change can result in unnoticed oil loss and potential engine damage. Always inspect the oil filter, drain plug, and surrounding areas for leaks after completing an oil change to ensure everything is properly sealed.
Skipping Regular Oil Changes
Skipping regular oil changes can lead to oil degradation, sludge buildup, and increased engine wear. Regular oil changes are essential for maintaining engine cleanliness, lubrication, and performance. Follow the recommended oil change intervals to keep your engine running smoothly.
Not Replacing the Oil Pan Gasket
A worn or damaged oil pan gasket can lead to oil leaks and reduced engine protection. Always inspect and replace the oil pan gasket as needed during oil changes to prevent leaks and maintain proper oil pressure.
Leaving the Oil Cap Off
Forgetting to replace the oil cap after an oil change can cause oil to spill out and contaminants to enter the engine. Always double-check that the oil cap is securely in place before starting the engine to avoid potential damage.
Using the Wrong Oil Filter
Using the wrong oil filter can result in poor filtration, reduced oil flow, and potential engine damage. Always use the correct oil filter specified for your vehicle to ensure proper filtration and engine protection.
Forgetting to Reset the Oil Change Light
Failing to reset the oil change light can lead to confusion about when the next oil change is due. Always reset the oil change indicator after completing an oil change to maintain an accurate maintenance schedule.
This article originally appeared in MyCarMakesNoise.
More from MyCarMakesNoise
Exploring the Rich Legacy of the Mustang
In the world of automotive history, few names evoke as much passion and nostalgia as the Ford Mustang. Since its thunderous debut in 1964, the Mustang has been more than just a car; it’s a symbol of American muscle, style, and the open road. Read More
13 Opulent RVs That Redefine On-the-Road Comfort
Luxury recreational vehicles (RVs) are more than just modes of travel; they’re a statement of sophistication, comfort, and technology on wheels. These rolling mansions offer the finest amenities, from high-end interiors to state-of-the-art technology, blending the thrills of the open road with the comforts of a luxury home. Read More
15 Intriguing Facts About the Iconic DeLorean DMC-12
The DeLorean DMC-12 is a car that has captured the public’s imagination like few others, thanks to its unique design, limited production run, and prominent role in pop culture. Read More
